The model GDHT-20 transmitter is a multi-sensor system with digital output for the measurement parameters of pressure, temperature and humidity. Based on these measured values, the condition-related data can be determined.
In order to prevent system failures in switchgear and, with that, network outages, the permanent monitoring of the gas density and moisture content is essential.
The GDHT-20 transmitter calculates the current gas density from the pressure and temperature using a complex virial equation in the transmitter’s powerful microprocessor. Pressure changes resulting from thermal effects will be compensated by this and will not affect the output value.
In addition, the GDHT-20 transmitter delivers humidity or dew point information online, which enables monitoring within the terms of Cigre guidelines and IEC Standards.
Due to its high long-term stability, the transmitter is maintenance-free and requires no recalibration. Through the hermetically sealed weld seam and a measuring cell design without sealing elements, the permanent sealing of the measuring cell is ensured.
The EMC characteristics fulfill the IEC 61000-4-2 through to IEC 61000-4-6 standards and guarantee an interference-free data output.
- Permanent monitoring of the relevant gas condition parameters in closed tanks
- For indoor and outdoor SF6 gas-insulated equipment
- High-accuracy sensor technology
- MODBUS® output protocol via RS0485 interface
- Ingress protection IP65
- Very good long-term stability and EMC characteristics
- Compact dimensions
For more help with your applications, please contact us at Duncan Company!